Fig.3-24 Model coil to demonstrate the"ITER" Central Solenoid (CS) (left), schematic diagram of coil cross section (center) and superconducting conductor cable unit (right)

Fig.3-24 Model coil to demonstrate the"ITER" Central Solenoid (CS) (left),
schematic diagram of coil cross section (center) and superconducting conductor cable unit (right)

The length of the conductor in the CS is about 900 m. The conductor is wound into a coil and then given heat treatment at 650°C x 240 h in furnace to produce superconducting Nb₃Sn.

Go back by your web browser, or click the right button. « Close